H3C MSR Series Command Reference Manual page 180

Error packets: 0
Online 802.1X users: 1
MAC address
0001-0000-0002
Table 13 Command output
Field
Global 802.1X parameters
802.1X authentication
CHAP authentication
EAP authentication
PAP authentication
Max-tx period
Handshake period
Quiet timer
Quiet period
Supp timeout
Server timeout
Reauth period
Max auth requests
SmartOn switch ID
SmartOn supp timeout
SmartOn retry counts
EAD assistant function
URL
Free IP
EAD timeout
Domain delimiter
Online 802.1X wired users
Online 802.1X wireless users
GigabitEthernet1/0/1 is link-up
Auth state
Authenticated
Description
Global 802.1X configuration.
Whether 802.1X is enabled globally.
Performs EAP termination and uses CHAP to communicate with the
RADIUS server.
If EAP or PAP is enabled, this field is not available.
Relays EAP packets and supports any of the EAP authentication
methods to communicate with the RADIUS server.
If CHAP or PAP is enabled, this field is not available.
Performs EAP termination and uses PAP to communicate with the
RADIUS server.
If CHAP or EAP is enabled, this field is not available.
Username request timeout timer in seconds.
Handshake timer in seconds.
Status of the quiet timer, enabled or disabled.
Quiet timer in seconds.
Client timeout timer in seconds.
Server timeout timer in seconds.
Periodic reauthentication timer in seconds.
Maximum number of attempts for sending an authentication request
to a client.
Switch ID for SmartOn authentication.
SmartOn client timeout timer in seconds.
Maximum number of attempts for retransmitting an
EAP-Request/Notification packet to a client.
Whether EAD assistant is enabled.
Redirect URL for unauthenticated users using a Web browser to
access the network.
Network segment accessible to unauthenticated users.
EAD rule timer in minutes.
Domain delimiters supported by the device.
Number of wired online 802.1X users, including users that have
passed 802.1X authentication and users that are performing 802.1X
authentication.
Number of wireless online 802.1X users, including users that have
passed 802.1X authentication and users that are performing 802.1X
authentication.
Status of the port. In this example, GigabitEthernet 1/0/1 is up.
157