Ssh Redirect Disconnect - H3C MSR Series Command Reference Manual

The SSH redirect server can provide the SSH redirect service after SSH redirect is enabled and an
SSH redirect listening port is configured. The SSH client can use the ssh2 ip address port number
command to access the destination device. The ip address argument and the port number argument
specify the IP address of the SSH redirect server and the SSH redirect listening port, respectively.
After the ssh ip alias command is configured, the client can use the ssh2 ip address command to
access the destination device. The ip address argument specifies the IP address associated with the
SSH redirect listening port.
If you specify multiple SSH redirect listening ports for an IP address, the most recent configuration
takes effect.
Examples
# Associate SSH redirect listening port 4000 with IP address 1.1.1.1.
<Sysname> system-view
[Sysname] ssh ip alias 1.1.1.1 4000
Related commands

ssh redirect disconnect

ssh redirect listen-port
ssh redirect disconnect
Use ssh redirect disconnect to terminate the redirected SSH connection.
Syntax
ssh redirect disconnect
Views
AUX line view
TTY line view
Predefined user roles
network-admin
Usage guidelines
The following matrix shows the command and hardware compatibility:
Hardware
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE
/810-LM-HK/810-W-LM-HK/810-LMS/810-LUS
MSR2600-10-X1
MSR 2630
MSR3600-28/3600-51
MSR3600-28-SI/3600-51-SI
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC
MSR 3610/3620/3620-DP/3640/3660
MSR5620/5660/5680
Examples
# Terminate the redirected SSH connection on TTY line 1.
Command compatibility
No
Yes
Yes
Yes
Yes
Yes
Yes
No
678