Display Ssh User-Information - H3C MSR Series Command Reference Manual

Table 100 Command output
Field
UserPid
SessID
Ver
Encrypt
State
Retries
Serv
Username
Idx

display ssh user-information

Use display ssh user-information to display information about SSH users on an SSH server.
Syntax
display ssh user-information [ username ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
username: Specifies an SSH username, a case-sensitive string of 1 to 80 characters. If you do not
specify an SSH user, this command displays information about all SSH users.
Usage guidelines
This command displays information only about SSH users that are configured by using the ssh user
command on the SSH server.
Examples
# Display information about all SSH users.
<Sysname> display ssh user-information
Description
User process ID.
Session ID.
Protocol version of the SSH server.
Encryption algorithm used on the SSH server.
Session state:
•
Init—Initialization.
•
Ver-exchange—Version negotiation.
•
Keys-exchange—Key exchange.
•
Auth-request—Authentication request.
•
Serv-request—Session service request.
•
Established—The session is established.
•
Disconnected—The session is terminated.
Number of authentication failures.
Service type:
•
SCP.
•
SFTP.
•
Stelnet.
•
NETCONF.
Username that the client uses to log in to the server.
Absolute number of the user line. This field is empty if the SSH
connection for the user is not redirected.
674