Display Attack-Defense Scan Victim Ip - H3C MSR Series Command Reference Manual

Totally 3 attackers.
Slot 2:
Totally 0 attackers.
# (Distributed devices in IRF mode.) Display the number of IPv6 scanning attackers.
<Sysname> display attack-defense scan attacker ipv6 count
Slot 1 in chassis 1:
Totally 3 attackers.
Slot 2 in chassis 2:
Totally 0 attackers.
Table 159 Command output
Field
Totally 3 attackers
IPv6 address
VPN instance
Protocol
Detected on
Duration(min)
Related commands
display attack-defense scan victim ipv6
scan detect

display attack-defense scan victim ip

Use display attack-defense scan victim ip to display information about IPv4 scanning attack
victims.
Syntax
Centralized devices in standalone mode:
display attack-defense scan victim ip [ interface interface-type interface-number | local ]
[ count ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display attack-defense scan victim ip [ [ interface interface-type interface-number | local ] [ slot
slot-number ] ] [ count ]
Distributed devices in IRF mode:
display attack-defense scan victim ip [ [ interface interface-type interface-number | local ]
[ chassis chassis-number slot slot-number ] ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Description
Total number of IPv6 scanning attackers.
IPv6 address of the attacker.
MPLS L3VPN instance to which the attacker IPv6 address belongs. If the
attacker IPv6 address is on the public network, this field displays hyphens
(--).
Name of the protocol.
Where the attack is detected, on the device (Local) or an interface.
The amount of time the attack lasts, in minutes.
1009