H3C MSR Series Configuration Manual
Comware 7 oaa
Hide thumbs
Also See for MSR Series:
- Command reference manual (1187 pages) ,
- Configuration manual (80 pages) ,
- Manual (33 pages)
Related Manuals for H3C MSR Series
Summary of Contents for H3C MSR Series
- Page 1 H3C MSR Router Series Comware 7 OAA Configuration Guide New H3C Technologies Co., Ltd. http://www.h3c.com Software version: MSR-CMW710-R0615 Document version: 6W202-20200321...
- Page 2 The information in this document is subject to change without notice. All contents in this document, including statements, information, and recommendations, are believed to be accurate, but they are presented without warranty of any kind, express or implied. H3C shall not be liable for technical or editorial errors or omissions contained herein.
- Page 3 Preface This configuration guide describes the Open Application Architecture (OAA) supported protocols (such as ACFP and ACSEI), their configurations, and the configuration of the H3C open application platform (OAP) card. This preface includes the following topics about the documentation: •...
- Page 4 Convention Description Folder. Symbols Convention Description An alert that calls attention to important information that if not understood or followed WARNING! can result in personal injury. An alert that calls attention to important information that if not understood or followed CAUTION: can result in data loss, data corruption, or damage to hardware or software.
- Page 5 It is normal that the port numbers, sample output, screenshots, and other information in the examples differ from what you have on your device. Documentation feedback You can e-mail your comments about product documentation to info@h3c.com. We appreciate your comments.
-
Page 6: Table Of Contents
Contents Configuring the OAP module ········································································· 1 Overview ···························································································································································· 1 Compatibility information ···································································································································· 1 Feature and hardware compatibility ··········································································································· 1 Command and hardware compatibility ······································································································· 1 Logging in to the OAP module ··························································································································· 2 Configuring network parameters for the OAP module ······················································································· 2 Configuring network parameters for an OAP module that runs the CVK operating system·······················... -
Page 7: Configuring The Oap Module
Configuring the OAP module Overview H3C Open Application Architecture provides an open interface for third-party vendors to develop and integrate value-added applications into H3C products. These applications can apply to one of the following forms: • A standalone network device. -
Page 8: Logging In To The Oap Module
• MSR 3610/3620/3620-DP/3640/3660. Commands and descriptions for distributed devices apply to the following routers: • MSR5620. • MSR 5660. • MSR 5680. Logging in to the OAP module From the CLI of the router, you can log in to the operating system of the OAP module. To return to the CLI of the router, press Ctrl+K. -
Page 9: Configuring Network Parameters For An Oap Module That Runs The Linux Operating System
hostname: cvknode ipaddress: 192.168.0.162 netmask: 255.255.255.0 gateway: 192.168.0.1 network: 192.168.0.0 broadcast: 192.168.0.255 nameserver: 192.168.0.1 Please input hostname: Configure network parameters as prompted. Please input hostname: host1 Please input ipaddress: 192.168.0.167 Please input netmask: 255.255.255.0 Please input gateway: 192.168.0.1 (This setting is optional.) Please input nameserver: 192.168.0.1 (This setting is optional.) The hostname is cvknode by default. -
Page 10: Rebooting The Oap Module
[root@localhost ~]# Rebooting the OAP module CAUTION: Rebooting the OAP module might cause a service outage. IMPORTANT: To avoid service data loss, close the operating system of the OAP module before rebooting the module. You can reboot the OAP module if it fails or is not operating correctly. Pressing the reboot button of the OAP module has the same effect. -
Page 11: Index
Index C L O R Logging in to the OAP module,2 Compatibility information,1 Configuring network parameters for the OAP Overview,1 module,2 Rebooting the OAP module,4...