Sa Duration - H3C MSR Series Command Reference Manual

Use undo reverse-route tag to restore the default.
Syntax
reverse-route tag tag-value
undo reverse-route tag
Default
The route tag value is 0 for the static routes created by IPsec RRI.
Views
IPsec policy view
IPsec policy template view
Predefined user roles
network-admin
Parameters
tag-value: Specifies a tag value. The value range is 1 to 4294967295.
Usage guidelines
The tag value set by this command helps in implementing flexible route control through routing
policies.
When you change this tag value in an IPsec policy, the device deletes all IPsec SAs created by this
IPsec policy, and all associated static routes.
Examples
# Set the tag value to 50 for the static routes created by IPsec RRI.
<Sysname>system-view
[Sysname] ipsec policy 1 1 isakmp
[Sysname-ipsec-policy-isakmp-1-1] reverse-route tag 50
Related commands
ipsec policy
ipsec policy-template

sa duration

Use sa duration to set an SA lifetime.
Use undo sa duration to remove the SA lifetime.
Syntax
sa duration { time-based seconds | traffic-based kilobytes }
undo sa duration { time-based | traffic-based }
Default
The SA lifetime of an IPsec policy, IPsec policy template, or IPsec profile is the current global SA
lifetime.
Views
IPsec policy view
IPsec policy template view
IPsec profile view
560