Priority (Ikev2 Profile View); Proposal - H3C MSR Series Command Reference Manual

priority (IKEv2 profile view)

Use priority to set a priority for an IKEv2 profile.
Use undo priority to restore the default.
Syntax
priority priority
undo priority
Default
The priority of an IKEv2 profile is 100.
Views
IKEv2 profile view
Predefined user roles
network-admin
Parameters
priority: Specifies the priority of the IKEv2 profile, in the range of 1 to 65535. A smaller number
represents a higher priority.
Usage guidelines
The priority set by this command can only be used to adjust the match order of IKEv2 profiles.
Examples
# Set the priority to 10 for the IKEv2 profile profile1.
<Sysname> system-view
[Sysname] ikev2 profile profile1
[Sysname-ikev2-profile-profile1] priority 10

proposal

Use proposal to specify an IKEv2 proposal for an IKEv2 policy.
Use undo proposal to remove an IKEv2 proposal from an IKEv2 policy.
Syntax
proposal proposal-name
undo proposal proposal-name
Default
No IKEv2 proposal is specified for an IKEv2 policy.
Views
IKEv2 policy view
Predefined user roles
network-admin
Parameters
proposal-name: Specifies an IKEv2 proposal by its name, a case-insensitive string of 1 to 63
characters.
649