Exclude - H3C MSR Series Command Reference Manual

Syntax
emo-server address { host-name | ipv4-address } port port-number
undo emo-server
Default
No EMO server is specified for mobile clients.
Views
SSL VPN context view
Predefined user roles
network-admin
Parameters
address: Specifies the host name or IPv4 address of the EMO server.
host-name: Specifies the host name of the EMO server, a case-insensitive string of 1 to 127
characters. Valid characters are letters, digits, underscores (_), hyphens (-), and dots (.).
ipv4-address: Specifies the IPv4 address of the EMO server, in dotted decimal notation. The IP
address cannot be a multicast, broadcast, or loopback address.
port port-number: Specifies the port number of the EMO server, in the range of 1025 to 65535.
Usage guidelines
An EMO server provides services for mobile clients. The SSL VPN gateway issues the EMO server
information to the clients, and the clients can access available service resources through the EMO
server.
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Specify the IP address of the EMO server as 10.10.1.1 and the port number as 9058 for context
ctx1.
<Sysname> system-view
[Sysname] sslvpn context ctx1
[Sysname-sslvpn-context-ctx1] emo-server address 10.10.1.1 port 9058

exclude

Use exclude to add an exclude route to a route list.
Use undo exclude to delete an exclude route from a route list.
Syntax
exclude ip-address { mask | mask-length }
undo exclude ip-address { mask | mask-length }
Default
No exclude routes exist in a route list.
Views
Route list view
Predefined user roles
network-admin
753