Port-Security Authorization Ignore - H3C MSR Series Command Reference Manual

<Sysname> display port-security mac-address security interface gigabitethernet 1/0/1
MAC ADDR
000d-88f8-0577
--- 1 mac address(es) found
# Display information about secure MAC addresses of GigabitEthernet 1/0/1 in VLAN 1.
<Sysname> display port-security mac-address security interface gigabitethernet 1/0/1 vlan
1
MAC ADDR
000d-88f8-0577
--- 1 mac address(es) found
Table 19 Command output
Field
MAC ADDR
VLAN ID
STATE
PORT INDEX
AGING TIME
number mac address(es) found
Related commands
port-security mac-address security

port-security authorization ignore

Use port-security authorization ignore to configure a port to ignore the authorization information
received from the authentication server (a RADIUS server or the local device).
Use undo port-security authorization ignore to restore the default.
Syntax
port-security authorization ignore
undo port-security authorization ignore
Default
A port uses the authorization information from the server.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
VLAN ID STATE
1 Security
---
VLAN ID STATE
1 Security
---
Description
Secure MAC address.
ID of the VLAN to which the port belongs.
Type of the MAC address added. This field displays Security for a
secure MAC address.
Port to which the secure MAC address belongs.
Period of time before the secure MAC address ages out.
•
•
Number of secure MAC addresses stored.
PORT INDEX
GE1/0/1
PORT INDEX
GE1/0/1
If the secure MAC address is a static MAC address, this field
displays NOAGED.
If the secure MAC address is a sticky MAC address, this field
displays the remaining lifetime in minutes. By default, sticky
MAC addresses do not age out, and this field displays
NOAGED.
213
AGING TIME
NOAGED
AGING TIME
NOAGED