H3C MSR Series Command Reference Manual page 535

Security data flow:
Remote address: 2.5.2.1
Transform set: transform
Inbound AH setting:
AH SPI: 1200 (0x000004b0)
AH string-key: ******
AH authentication hex key:
Inbound ESP setting:
ESP SPI: 1400 (0x00000578)
ESP string-key:
ESP encryption hex key:
ESP authentication hex key:
Outbound AH setting:
AH SPI: 1300 (0x00000514)
AH string-key: ******
AH authentication hex key:
Outbound ESP setting:
ESP SPI: 1500 (0x000005dc)
ESP string-key: ******
ESP encryption hex key:
ESP authentication hex key:
-----------------------------
Sequence number: 2
Mode: ISAKMP
-----------------------------
The policy configuration is incomplete:
Remote-address not set
ACL not specified
Transform-set not set
Description: This is my first IPv4 Isakmp policy
Traffic Flow Confidentiality: Enabled
Security data flow:
Selector mode: standard
Local address:
Remote address:
Transform set:
IKE profile:
IKEv2 profile:
SA duration(time based): 3600 seconds
SA duration(traffic based): 1843200 kilobytes
SA idle time:
-------------------------------------------
IPsec Policy: mycompletepolicy
512