H3C MSR Series Command Reference Manual page 861

Parameters
name group-name: Specifies an application group by its name. The group-name argument is a
case-insensitive string of 1 to 63 characters. The names invalid and other are not allowed. If you do
not specify any parameters, this command displays information about all application groups.
Examples
# Display information about all application groups.
<Sysname> display app-group
User-defined count:3
Group Name
6767
er
hbc
# Display information about application group er.
<Sysname> display app-group name er
Group English name: er
Group Chinese name: er
Group ID:
Type:
Application count:
Include application list:
Application name
114Travel
banc
pre-defined app-group count:0
Include pre-defined app-group list:
App-group name
Table 123 Command output
Field
User-defined count
Group Name
Group English name
Type
Application count
Include application list
Application name
App ID
Type
User-defined
User-defined
User-defined
0x00800001
User-defined
2
Type
Pre-defined
User-defined
Type
838
Group ID
0x00800002
0x00800001
0x00800003
App ID
0x0000542c
0x00800001
App-group ID
Description
Number of application groups.
Name of the application group.
English name of the application group.
Application protocol attribute:
•
Pre-defined.
•
User-defined.
This filed always displays User-defined for
application groups.
Number of application protocols in the application
group.
Application protocol list.
Application protocol name.
Application protocol ID.