Dynamic-Password Enable; Emo-Server - H3C MSR Series Command Reference Manual

Table 115 Command output
Field
User
Context
Policy group
Idle timeout
Created at
Lastest
Allocated IP
User IPv4 address
User IPv6 address
Web browser/OS

dynamic-password enable

Use dynamic-password enable to enable dynamic password verification.
Use undo dynamic-password enable to disable dynamic password verification.
Syntax
dynamic-password enable
undo dynamic-password enable
Default
Dynamic password verification is disabled.
Views
SSL VPN context view
Predefined user roles
network-admin
Usage guidelines
After dynamic password verification is enabled, a user must enter a correct dynamic password to log
in to the SSL VPN webpage.
Examples
# Enable dynamic password verification.
<Sysname> system-view
[Sysname] sslvpn context ctx
[Sysname-sslvpn-context-ctx] dynamic-password enable

emo-server

Use emo-server to specify an Endpoint Mobile Office (EMO) server for mobile clients.
Use undo emo-server to restore the default.
Description
SSL VPN username.
Context to which the user belongs.
Policy group used by the user.
Idle timeout time of the SSL VPN session, in seconds.
Creation time of the SSL VPN session.
Most recent time when the SSL VPN user accessed resources through the
SSL VPN session.
IP address allocated to the iNode client of the SSL VPN user.
This field is displayed only for iNode users.
IPv4 address used by the SSL VPN session.
IPv6 address used by the SSL VPN session.
Web browser or operating system used by the SSL VPN user.
752