Portal Fail-Permit Web-Server - H3C MSR Series Command Reference Manual

Views
Interface view
Predefined user roles
network-admin
Parameters
ipv6: Specifies an IPv6 portal authentication server. Do not specify this keyword for an IPv4 portal
authentication server.
server-name: Specifies a portal authentication server by its name, a case-sensitive string of 1 to 32
characters.
Usage guidelines
When portal fail-permit is enabled for a portal authentication server and portal Web servers on an
interface, the interface disables portal authentication in either of the following conditions:
•
All portal Web servers are unreachable.
•
The specified portal authentication server is unreachable.
Portal authentication resumes on the interface when the specified portal authentication server and a
minimum of one portal Web server becomes reachable. After portal authentication resumes, users
who failed portal authentication and unauthenticated portal users need to pass authentication to
access network resources. Portal users who have passed authentication can continue accessing
network resources.
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Enable portal fail-permit for portal authentication server pts1 on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] portal fail-permit server pts1
Related commands
display portal

portal fail-permit web-server

Use portal [ ipv6 ] fail-permit web-server to enable the portal fail-permit feature for portal Web
servers.
Use undo portal [ ipv6 ] fail-permit web-server to disable the portal fail-permit feature for portal
Web servers.
Syntax
portal [ ipv6 ] fail-permit web-server
undo portal [ ipv6] fail-permit web-server
Default
Portal fail-permit is disabled for portal Web servers.
Views
Interface view
Service template view
340