H3C MSR Series Command Reference Manual page 547

Encapsulation failure: 0
Decapsulation failure: 0
Replayed packets: 0
ACL check failure: 45
MTU check failure: 0
Loopback limit exceeded: 0
Crypto speed limit exceeded: 0
# Display statistics for the packets of IPsec tunnel 1.
<Sysname> display ipsec statistics tunnel-id 1
IPsec packet statistics:
Received/sent packets: 5124/8231
Received/sent bytes: 52348/64356
Dropped packets (received/sent): 0/0
Dropped packets statistics
No available SA: 0
Wrong SA: 0
Invalid length: 0
Authentication failure: 0
Encapsulation failure: 0
Decapsulation failure: 0
Replayed packets: 0
ACL check failure: 0
MTU check failure: 0
Loopback limit exceeded: 0
Crypto speed limit exceeded: 0
Table 81 Command output
Field
Received/sent packets
Received/sent bytes
Dropped packets (received/sent)
No available SA
Wrong SA
Invalid length
Authentication failure
Encapsulation failure
Decapsulation failure
Replayed packets
ACL check failure
MTU check failure
Loopback limit exceeded
Crypto speed limit exceeded
Description
Number of received/sent IPsec-protected packets.
Number of bytes of received/sent IPsec-protected packets.
Number of dropped IPsec-protected packets (received/sent).
Number of packets dropped due to lack of available IPsec SA.
Number of packets dropped due to wrong IPsec SA.
Number of packets dropped due to invalid packet length.
Number of packets dropped due to authentication failure.
Number of packets dropped due to encapsulation failure.
Number of packets dropped due to decapsulation failure.
Number of dropped replayed packets.
Number of packets dropped due to ACL check failure.
Number of packets dropped due to MTU check failure.
Number of packets dropped due to loopback limit exceeded.
Number of packets dropped due to crypto speed limit
exceeded.
524