Description - H3C MSR Series Command Reference Manual

Hardware
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE
/810-LM-HK/810-W-LM-HK/810-LMS/810-LUS
MSR2600-10-X1
MSR 2630
MSR3600-28/3600-51
MSR3600-28-SI/3600-51-SI
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC
MSR 3610/3620/3620-DP/3640/3660
MSR5620/5660/5680
Usage guidelines
In non-FIPS mode, you can specify multiple AH authentication algorithms for one IPsec transform
set, and the algorithm specified earlier has a higher priority.
For a manual or IKEv1-based IPsec policy, the first specified AH authentication algorithm takes
effect. To make sure an IPsec tunnel can be established successfully, the IPsec transform sets
specified at both ends of the tunnel must have the same first AH authentication algorithm.
Examples
# Specify the AH authentication algorithm HMAC-SHA1 for the IPsec transform set tran1.
<Sysname> system-view
[Sysname] ipsec transform-set tran1
[Sysname-ipsec-transform-set-tran1] ah authentication-algorithm sha1

description

Use description to configure a description for an IPsec policy, IPsec policy template, or IPsec
profile.
Use undo description to restore the default.
Syntax
description text
undo description
Default
No description is configured.
Views
IPsec policy view
IPsec policy template view
IPsec profile view
Predefined user roles
network-admin
Parameters
text: Specifies a description, a case-sensitive string of 1 to 80 characters.
Keyword compatibility
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
510