H3C MSR Series Command Reference Manual page 290

Comware 7 security

Hide thumbs Also See for MSR Series:

Table of Contents

Distributed devices in IRF mode:

display portal rule { all | dynamic | static } { ap ap-name [ radio radio-id ] | interface interface-type

interface-number [ chassis chassis-number slot slot-number ] }

Predefined user roles

network-admin

network-operator

all: Displays all portal filtering rules, including dynamic and static portal filtering rules.

dynamic: Displays dynamic portal filtering rules, which are generated after users pass portal

authentication. These rules allow packets with specific source IP addresses to pass the interface.

static: Displays static portal filtering rules, which are generated after portal authentication is

enabled. The interface filters packets by these rules when portal authentication is enabled.

ap ap-name: Specifies an AP by its name, a case-insensitive string of 1 to 64 characters. Valid

characters are letters, digits, underscores (_), left brackets ([), right brackets (]), slashes (/), and

minus signs (-).

radio radio-id: Specifies a radio by its ID. The value range for the radio ID varies by device model. If

you do not specify a radio, this command displays portal filtering rules for all radios of the AP.

The following matrix shows the ap ap-name [ radio radio-id ] option and hardware compatibility:

MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/

810-LM-HK/810-W-LM-HK

MSR810-LMS/810-LUS

MSR2600-10-X1

MSR3600-28/3600-51

MSR3600-28-SI/3600-51-SI

MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC

MSR 3610/3620 /3620-DP/3640/3660

MSR5620/5660/5680

interface interface-type interface-number: Specifies an interface by its type and number.

slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command

displays portal filtering rules for all cards. (Distributed devices in standalone mode.)

slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member

device, this command displays portal filtering rules for all member devices. (Centralized devices in

chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The

chassis-number argument represents the member ID of the IRF member device. The slot-number

argument represents the slot number of the card. If you do not specify a card, this command displays

portal filtering rules for all cards. (Distributed devices in IRF mode.)

Option compatibility