<Sysname> system-view
[Sysname] acl ipv6 basic 2001
[Sysname-acl6-ipv6-basic-2001] rule permit source 1::1 64
[Sysname-acl6-ipv6-basic-2001] quit
[Sysname] ssh server ipv6 acl ipv6 2001
Related commands
display ssh server
ssh server ipv6 dscp
Use ssh server ipv6 dscp to set the DSCP value in the IPv6 SSH packets that the SSH server
sends to SSH clients.
Use undo ssh server ipv6 dscp to restore the default.
Syntax
ssh server ipv6 dscp dscp-value
undo ssh server ipv6 dscp
Default
The DSCP value is 48 in IPv6 SSH packets.
Views
System view
Predefined user roles
network-admin
Parameters
dscp-value: Specifies the DSCP value in the IPv6 SSH packets, in the range of 0 to 63. A bigger
DSCP value represents a higher priority.
Usage guidelines
The DSCP value of an IPv6 packet specifies the priority of the packet and affects the transmission
priority of the packet.
Examples
# Set the DSCP value to 30 for IPv6 SSH packets.
<Sysname> system-view
[Sysname] ssh server ipv6 dscp 30
ssh server port
Use ssh server port to specify the SSH service port.
Use undo ssh server port to restore the default.
Syntax
ssh server port port-number
undo ssh server port
Default
The SSH service port is 22.
687