Port-Mapping - H3C MSR Series Command Reference Manual

Default
If the APR signature database is automatically updated at a regular basis, the current APR signature
file is not overwritten for an update operation. Instead, the device will back up the current APR
signature file.
Views
Auto-update configuration view
Predefined user roles
network-admin
Usage guidelines
The following matrix shows the command and hardware compatibility:
Hardware
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM
-HK/810-W-LM-HK
MSR810-LMS/810-LUS
MSR2600-10-X1
MSR 2630
MSR3600-28/3600-51
MSR3600-28-SI/3600-51-SI
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC
MSR 3610/3620/3620-DP/3640/3660
MSR5620/5660/5680
Use this command only if the device memory is insufficient.
This command disables the APR signature database from being rolled back to the last version. Do
not use this command if the device memory is sufficient.
Examples
# Overwrite the current APR signature file for a regular online auto-update operation.
<Sysname> system-view
[Sysname] apr signature auto-update
[Sysname-apr-autoupdate] override-current
Related commands
apr signatures auto-update

port-mapping

Use port-mapping to configure a general port mapping.
Use undo port-mapping to remove a general port mapping.
Syntax
port-mapping application application-name port port-number [ protocol protocol-name ]
undo port-mapping application application-name port port-number [ protocol protocol-name ]
853
Command compatibility
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes