Server-Verify Enable - H3C MSR Series Command Reference Manual

rsa_aes_256_cbc_sha: Specifies the cipher suite that uses key exchange algorithm RSA, data
encryption algorithm 256-bit AES_CBC, and MAC algorithm SHA.
rsa_des_cbc_sha: Specifies the cipher suite that uses key exchange algorithm RSA, data
encryption algorithm DES_CBC, and MAC algorithm SHA.
rsa_rc4_128_md5: Specifies the cipher suite that uses key exchange algorithm RSA, data
encryption algorithm 128-bit RC4, and MAC algorithm MD5.
rsa_rc4_128_sha: Specifies the cipher suite that uses key exchange algorithm RSA, data
encryption algorithm 128-bit RC4, and MAC algorithm SHA.
Usage guidelines
SSL employs the following algorithms:
•
Data encryption algorithms—Encrypt data to ensure privacy. Commonly used data
encryption algorithms are usually symmetric key algorithms, such as DES_CBC,
3DES_EDE_CBC, AES_CBC, and RC4. When using a symmetric key algorithm, the SSL
server and the SSL client must use the same key.
•
Message Authentication Code (MAC) algorithms—Calculate the MAC value for data to
ensure integrity. Commonly used MAC algorithms include MD5 and SHA. When using a MAC
algorithm, the SSL server and the SSL client must use the same key.
•
Key exchange algorithms—Implement secure exchange of the keys used by the symmetric
key algorithm and the MAC algorithm. Commonly used key exchange algorithms are
asymmetric key algorithms, such as RSA.
The SSL client sends the preferred cipher suite to the SSL server. The server compares the received
cipher suite with the cipher suits it supports. If a match is found, the cipher suite negotiation
succeeds. If no match is found, the negotiation fails.
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Configure SSL client policy policy1 to support key exchange algorithm RSA, data encryption
algorithm 128-bit AES_CBC, and MAC algorithm SHA.
<Sysname> system-view
[Sysname] ssl client-policy policy1
[Sysname-ssl-client-policy-policy1] prefer-cipher rsa_aes_128_cbc_sha
Related commands
ciphersuite
display ssl client-policy

server-verify enable

Use server-verify enable to enable the SSL client to use digital certificates to authenticate SSL
servers.
Use undo server-verify enable to disable SSL server authentication. The SSL client does not
authenticate any SSL servers.
Syntax
server-verify enable
undo server-verify enable
Default
The SSL client uses digital certificates to authenticate SSL servers.
729