Display Connection-Limit Statistics - H3C MSR Series Command Reference Manual

Field
New session flag
Related commands
connection-limit apply global ipv6-policy
connection-limit apply ipv6-policy
connection-limit ipv6-policy
limit

display connection-limit statistics

Use display connection-limit statistics to display the connection limit statistics globally or on an
interface.
Syntax
Centralized devices in standalone mode:
display connection-limit statistics { global | interface interface-type interface-number }
Distributed devices in standalone mode/centralized devices in IRF mode:
display connection-limit statistics { global | interface interface-type interface-number } [ slot
slot-number ]
Distributed devices in IRF mode:
display connection-limit statistics { global | interface interface-type interface-number } [ chassis
chassis-number slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
global: Displays the global connection limit statistics.
interface interface-type interface-number: Specifies an interface by its type and number.
slot slot-number: Specifies a card or virtual interface by its slot number. This option is available only
when you specify the global keyword or specify a virtual interface, such as a VLAN interface or
tunnel interface. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. This option is available only
when you specify the global keyword or specify a virtual interface, such as a VLAN interface or
tunnel interface. (Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
Description
Whether or not new connections can be created:
•
Permit—New connections can be created.
•
Deny—New connections cannot be created.
NOTE:
When the number of connections reaches the upper limit, this field displays
Permit although new connections are not allowed. This field displays Deny only
when the number of connections exceeds the upper limit.
929