Mgre Commands; Display Mgre Session - H3C MSR Series Command Reference Manual

mGRE commands

display mgre session

Use display mgre session to display mGRE session information.
Syntax
display mgre session [ interface tunnel interface-number [ peer ipv4-address ] ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface tunnel interface-number: Specifies an mGRE tunnel interface by its number in the range
of 0 to 4095. If you do not specify this option, the command displays mGRE session information for
all mGRE tunnel interfaces.
peer ipv4-address: Specifies a peer public address. If you do not specify this option, the command
displays all mGRE session information for the specified mGRE tunnel interface.
verbose: Displays detailed information about IPv4 mGRE sessions. If you do not specify this
keyword, the command displays brief information about mGRE sessions.
Usage guidelines
If you do not specify any parameters, this command displays brief information about all mGRE
sessions on all tunnel interfaces.
Examples
# Display brief information about all mGRE sessions.
<Sysname> display mgre session
Interface
Number of sessions: 2
Peer NBMA address
10.0.0.3
10.0.1.4
# Display brief information about mGRE sessions on the specified tunnel interface.
<Sysname> display mgre session interface tunnel 1
Interface
Number of sessions: 2
Peer NBMA address
10.0.0.3
10.0.1.4
# Display brief information about the mGRE session with the specified peer address.
<Sysname> display mgre session interface tunnel 1 peer 10.0.0.3
Interface
Number of sessions: 1
Peer NBMA address
: Tunnel1
Peer protocol address
192.168.180.136
192.168.180.137
: Tunnel1
Peer protocol address
192.168.180.136
192.168.180.137
: Tunnel1
Peer protocol address
Type State
C-S Succeeded
C-C Establishing
Type State
C-S Succeeded
C-C Establishing
Type State
1142
State duration
00:30:01
00:30:02
State duration
00:30:01
00:30:02
State duration