Ssh Redirect Timeout - H3C MSR Series Command Reference Manual

Examples
# Set the SSH redirect listening port number to 5000 on TTY line 1.
<Sysname> system-view
[Sysname] line tty 1
[Sysname-line-tty1] ssh redirect listen-port 5000
Related commands
ssh redirect enable

ssh redirect timeout

Use ssh redirect timeout to set the idle-timeout timer for the redirected SSH connection.
Use undo ssh redirect timeout to restore the default.
Syntax
ssh redirect timeout time
undo ssh redirect timeout
Default
The idle-timeout timer is 360 seconds.
Views
AUX line view
TTY line view
Predefined user roles
network-admin
Parameters
time: Specifies the idle-timeout timer in seconds. The value range is 0 to 86400. To disable the
timeout mechanism, set the timeout timer to 0.
Usage guidelines
The following matrix shows the command and hardware compatibility:
Hardware
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE
/810-LM-HK/810-W-LM-HK/810-LMS/810-LUS
MSR2600-10-X1
MSR 2630
MSR3600-28/3600-51
MSR3600-28-SI/3600-51-SI
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC
MSR 3610/3620/3620-DP/3640/3660
MSR5620/5660/5680
The redirected SSH connection is idle when no data is received from the SSH client. This command
sets the maximum length of time that the redirected connection can be idle before it is terminated.
Command compatibility
No
Yes
Yes
Yes
Yes
Yes
Yes
No
681