Peer; Pre-Shared-Key - H3C MSR Series Command Reference Manual

[Sysname-ikev2-profile-profile1]nat-keepalive 1200
Related commands
display ikev2 profile
ikev2 nat-keepalive

peer

Use peer to create an IKEv2 peer and enter its view, or enter the view of an existing IKEv2 peer.
Use undo peer to delete an IKEv2 peer.
Syntax
peer name
undo peer name
Default
No IKEv2 peers exist.
Views
IKEv2 keychain view
Predefined user roles
network-admin
Parameters
name: Specifies a name for the IKEv2 peer. The peer name is a case-insensitive string of 1 to 63
characters.
Usage guidelines
An IKEv2 peer contains a pre-shared key and the criteria for looking up the peer. The criteria for peer
lookup includes the peer's host name, IP address, IP address range, and ID. The IKEv2 negotiation
initiator uses the peer's host name, IP address, or IP address range to look up its peer. The
responder uses the peer's IP address, IP address range, or ID to look up its peer.
Examples
# Create an IKEv2 keychain named key1 and enter IKEv2 keychain view.
<Sysname> system-view
[Sysname] ikev2 keychain key1
# Create an IKEv2 peer named peer1.
[Sysname-ikev2-keychain-key1] peer peer1
Related commands
address
hostname
identity
ikev2 keychain

pre-shared-key

Use pre-shared-key to configure a pre-shared key.
Use undo pre-shared-key to delete a pre-shared key.
645