H3C MSR Series Command Reference Manual page 869

Comware 7 security

Hide thumbs Also See for MSR Series:

Table of Contents

argument represents the slot number of the card. This option is available only for global interfaces,

such as VLAN and tunnel interface. (Distributed devices in IRF mode.)

Usage guidelines

This command displays application statistics only after the application statistics feature is enabled on

the specified interface. Disabling the application statistics feature on the interface deletes the

existing statistics.

The system uses the sum of inbound and outbound statistics to rank the application protocols. If the

sum statistics for multiple application protocols is the same, the system displays these protocols in

alphabetical order.

# Display the top three application protocols that have received and sent the most packets on

GigabitEthernet 1/0/1.

<Sysname> display application statistics top 3 packets interface gigabitethernet 1/0/1

Interface : GigabitEthernet1/0/1

# Display the top three application protocols that have received and sent the most bytes on

GigabitEthernet 1/0/1.

<Sysname> display application statistics top 3 bytes interface gigabitethernet 1/0/1

Interface : GigabitEthernet1/0/1

# Display the top three application protocols that have received and sent the most packets per

second on GigabitEthernet 1/0/1.

<Sysname> display application statistics top 3 pps interface gigabitethernet 1/0/1

Interface : GigabitEthernet1/0/1

In/Out Packets

190023111111111111 252334402111111111 2342222222

In/Out Packets

190023111111111111 252334402111111111 2342222222

OUT 21986666666

In/Out Packets

190023111111111111 252334402111111111

OUT 21986666666

OUT 21986666666

655555555123123101 55551

5555555551231231

155555555123123101 55551

5555555551231231

655555555123123101

5555555551231231

2342222222 3411222222