SSH commands
Commands and descriptions for centralized devices apply to the following routers:
•
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM-HK/810-W-LM-HK/810-L
MS/810-LUS.
•
MSR2600-10-X1.
•
MSR 2630.
•
MSR3600-28/3600-51.
•
MSR3600-28-SI/3600-51-SI.
•
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC.
•
MSR 3610/3620/3620-DP/3640/3660.
Commands and descriptions for distributed devices apply to the following routers:
•
MSR5620.
•
MSR 5660.
•
MSR 5680.
IPv6-related parameters are not supported on the following routers:
•
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE/810-LM-HK/810-W-LM-HK/810-L
MS/810-LUS.
•
MSR3600-28-SI/3600-51-SI.
The device supports the FIPS mode that complies with NIST FIPS 140-2 requirements. Support for
features, commands, and parameters might differ in FIPS mode and non-FIPS mode. For more
information about FIPS mode, see Security Configuration Guide.
SSH server commands
display ssh server
Use display ssh server on an SSH server to display the SSH server status or sessions.
Syntax
Centralized devices in standalone mode:
display ssh server { session | status }
Distributed devices in standalone mode/centralized devices in IRF mode:
display ssh server { session [ slot slot-number ] | status }
Distributed devices in IRF mode:
display ssh server { session [ chassis chassis-number slot slot-number ] | status }
Views
Any view
Predefined user roles
network-admin
network-operator
672