H3C MSR Series Command Reference Manual page 949

count: Displays only the number of limit rule-based statistics sets. Detailed information about the
specified IPv6 connections is not displayed. If you do not specify this keyword, the command
displays detailed information about the specified IPv6 connections that match connection limit rules.
Usage guidelines
The statistics for connections that match connection limit rules include the following information:
•
Connection information, including the source/destination IP address, service port, and transport
layer protocol of connections.
•
Matching connection limit rules.
•
Number of current connections.
•
Whether or not new connections can be created.
To further filter the output statistics, specify the following options in the command:
•
source source-ip.
•
destination destination-ip.
•
service-port port-number.
For example, if you specify the source source-ip and destination destination-ip combination, this
command displays statistics about IPv6 connections that match connection limit rules by source IP
address and destination IP address.
If you specify none of the source source-ip, destination destination-ip, and service-port
port-number options, this command displays statistics about all IPv6 connections that match
connection limit rules.
Deleting or modifying an IPv6 connection limit policy will not delete the effective IPv6 connection limit
rule-based statistics sets. An IPv6 connection limit rule-based statistics set will be automatically
deleted after all the IPv6 connections for the set are disconnected.
Examples
# (Centralized devices in standalone mode.) Display statistics about all IPv6 connections that match
the connection limit rule on GigabitEthernet 2/0/1.
<Sysname> display connection-limit ipv6-stat-nodes interface gigabitethernet 2/0/1
Slot 2 :
Src IP address
VPN instance
Dst IP address
VPN instance
DS-Lite tunnel peer
Service
Limit rule ID
Sessions threshold Hi/Lo: 1000000/90000
Sessions count
Sessions limit rate
New session flag
# (Centralized devices in standalone mode.) Display statistics about all IPv6 connections that match
the connection limit rule on VLAN-interface 2.
<Sysname> display connection-limit ipv6-stat-nodes interface vlan-interface 2
Slot 2 :
Src IP address
VPN instance
Dst IP address
VPN instance
: Any
: vpn5
: fe80::5ed9:98ff:feb1:69b6
: abcdefghijklmnopqrstuvwxyzabcde
: 9876543210
: tcp/12345
: 12345(ACL: 3184)
: 150000
: 0
: Permit
: Any
: vpn5
: fe80::5ed9:98ff:feb1:69b6
: abcdefghijklmnopqrstuvwxyzabcde
926