Display Ikev2 Profile - H3C MSR Series Command Reference Manual

display ikev2 profile

Use display ikev2 profile to display the IKEv2 profile configuration.
Syntax
display ikev2 profile [ profile-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
profile-name: Specifies an IKEv2 profile by its name, a case-insensitive string of 1 to 63 characters.
If you do not specify an IKEv2 profile, this command displays the configuration of all IKEv2 profiles.
Examples
# Display the configuration of all IKEv2 profiles.
<Sysname> display ikev2 profile
IKEv2 profile: 1
Priority: 100
Match criteria:
Local address 1.1.1.1
Local address GigabitEthernet1/0/1
Local address 1:1::1:1
Remote identity ipv4 address 3.3.3.3/32
VRF vrf1
Inside-vrf:
Local identity: address 1.1.1.1
Local authentication method: pre-share
Remote authentication methods: pre-share
Keychain: Keychain1
Sign certificate domain:
Domain1
abc
Verify certificate domain:
Domain2
yy
SA duration: 500
DPD: Interval 32, retry 23, periodic
Config-exchange: Request, Set send, Set accept
NAT keepalive: 10
AAA authorization: Domain domain1, username ikev2
Table 89 Command output
Field
IKEv2 profile
Priority
Description
Name of the IKEv2 profile.
Priority of the IKEv2 profile.
617