Display Client-Verify Protected Ip - H3C MSR Series Command Reference Manual

<Sysname> display blacklist ipv6 count
Slot 1 in chassis 1:
Totally 3 blacklist entries.
Slot 2 in chassis 2:
Totally 3 blacklist entries.
Table 166 Command output
Field
IPv6 address
VPN instance
Type
TTL(sec)
Dropped
Totally 3 blacklist entries
Related commands
blacklist ipv6

display client-verify protected ip

Use display client-verify protected ip to display protected IPv4 addresses for client verification.
Syntax
Centralized devices in standalone mode:
display client-verify { dns | http | tcp } protected ip [ ip-address [ vpn vpn-instance-name ] ] [ port
port-number ] [ count ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display client-verify { dns | http | tcp } protected ip [ ip-address [ vpn vpn-instance-name ] ] [ port
port-number ] [ slot slot-number ] [ count ]
Distributed devices in IRF mode:
display client-verify { dns | http | tcp } protected ip [ ip-address [ vpn vpn-instance-name ] ] [ port
port-number ] [ chassis chassis-number slot slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
dns: Specifies the DNS client verification feature.
http: Specifies the HTTP client verification feature.
tcp: Specifies the TCP client verification feature.
Description
IPv6 address of the blacklist entry.
MPLS L3VPN instance to which the blacklisted IPv6 address belongs. If
the blacklisted IPv6 address is on the public network, this field displays
hyphens (--).
Type of the IPv6 blacklist entry, Manual or Dynamic.
Remaining aging time of the IPv6 blacklist entry, in seconds. If no aging
time is set for the entry, this field displays Never.
Number of dropped packets sourced from the IPv6 address.
Total number of IPv6 blacklist entries.
1030