Port (Mac Binding Server View) - H3C MSR Series Command Reference Manual

Usage guidelines
Some MAC binding servers identify MAC-based quick portal authentication by a specific
NAS-Port-Type value in received RADIUS requests. To communicate with such a MAC binding
server, you must configure the device to use the NAS-Port-Type value required by the MAC binding
server.
Examples
# Set the NAS-Port-Type value in RADIUS requests sent to the MAC binding server mts to 30.
<Sysname> system-view
[Sysname] portal mac-trigger-server mts
[Sysname-portal-mac-trigger-server-mts] nas-port-type 30
Related commands
display portal mac-trigger-server

port (MAC binding server view)

Use port to set the UDP port number the MAC binding server uses to listen for MAC binding query
packets.
Use undo port to restore the default.
Syntax
port port-number
undo port
Default
The MAC binding server listens for MAC binding query packets on UDP port 50100.
Views
MAC binding server view
Predefined user roles
network-admin
Parameters
port-number: Specifies the listening UDP port number in the range of 1 to 65534.
Usage guidelines
The specified port number must be the same as the query listening port number configured on the
MAC binding server.
Examples
# Set the UDP port number to 1000 for the MAC binding server pts to listen for MAC binding query
packets.
<sysname> system-view
[sysname] portal mac-trigger-server mts
[sysname-portal-mac-trigger-server-mts] port 1000
Related commands
display portal mac-trigger-server
316