H3C MSR Series Command Reference Manual page 764

Predefined user roles
network-admin
network-operator
Parameters
sslvpn-ac interface-number: Specifies an SSL VPN AC interface by its number in the range of 0 to
4095. If you specify the sslvpn-ac keyword without the interface-number argument, this command
displays information about all SSL VPN AC interfaces.
brief: Displays brief interface information. If you do not specify this keyword, the command displays
detailed interface information.
description: Displays complete interface descriptions. If you do not specify this keyword, the
command displays only the first 27 characters of interface descriptions.
down: Displays information about interfaces in the physical state of DOWN and the causes. If you do
not specify this keyword, the command displays information about interfaces in all states.
Examples
# Display detailed information about SSL VPN AC 1000.
<Sysname> display interface sslvpn-ac 1000
SSLVPN-AC1000
Current state: UP
Line protocol state: DOWN
Description: SSLVPN-AC1000 Interface
Bandwidth: 64kbps
Maximum transmission unit: 1500
Internet protocol processing: Disabled
Link layer protocol is SSLVPN
Last clearing of counters: Never
Last 300 seconds input rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Last 300 seconds output rate: 0 bytes/sec, 0 bits/sec, 0 packets/sec
Input: 0 packets, 0 bytes, 0 drops
Output: 0 packets, 0 bytes, 0 drops
Table 106 Command output
Field
SSLVPN-AC1000
Current state
Line protocol state
Description
Description
Information about interface SSL VPN AC 1000.
State of the interface:
•
Administratively DOWN—The interface has been shut down
by using the shutdown command.
•
DOWN—The interface is administratively up but its physical
state is down.
•
UP—Both the administrative and physical states of the
interface are up.
Link layer protocol state of the interface:
•
UP—The protocol state of the interface is up.
•
UP (spoofing)—The link protocol state of the interface is up,
but the link is temporarily set up on demand or does not exist.
This attribute is available for null interfaces and loopback
interfaces.
•
DOWN—The protocol state of the interface is down.
Description for the interface.
741