Blacklist Object-Group - H3C MSR Series Command Reference Manual

Related commands
blacklist ip
blacklist ipv6

blacklist object-group

Use blacklist object-group to add an address object group to the blacklist.
Use undo blacklist object-group to restore the default.
Syntax
blacklist object-group object-group-name
undo blacklist object-group
Default
No address object group is added to the blacklist.
Views
System view
Predefined user roles
network-admin
Parameters
object-group-name: Specifies an address object group by its name, a case-insensitive string of 1 to
31 characters.
Usage guidelines
The following matrix shows the command and hardware compatibility:
Hardware
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-10-PoE
/810-LM-HK/810-W-LM-HK
MSR810-LMS/810-LUS
MSR2600-10-X1
MSR 2630
MSR3600-28/3600-51
MSR3600-28-SI/3600-51-SI
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-DP-DC
MSR 3610/3620/3620-DP/3640/3660
MSR5620/5660/5680
This command must be used together with the address object group feature. For more information
about address object groups, see "Configuring object groups."
If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Add address object group object-group1 to the blacklist.
<Sysname> system-view
[Sysname] blacklist object-group object-group1
Command compatibility
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
984