Session Log Flow-End; Session Log Time-Active - H3C MSR Series Command Reference Manual

Usage guidelines
For the device to output a session log when a session entry is created, make sure both session
logging and logging for session creation are enabled.
Examples
# Enable logging for session creation.
<Sysname> system-view
[Sysname] session log flow-begin
Related commands
session log enable

session log flow-end

Use session log flow-end to enable logging for session deletion.
Use undo session log flow-end to disable logging for session deletion.
Syntax
session log flow-end
undo session log flow-end
Default
Logging for session deletion is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
For the device to output a session log when a session entry is deleted, make sure both session
logging and logging for session deletion are enabled.
Examples
# Enable logging for session deletion.
<Sysname> system-view
[Sysname] session log flow-end
Related commands
session log enable

session log time-active

Use session log time-active to set the time-based session logging.
Use undo session log time-active to restore the default.
Syntax
session log time-active time-value
undo session log time-active
Default
No threshold is set for time-based session logging.
915