Dot1X Smarton Retry - H3C MSR Series Command Reference Manual

If you execute this command multiple times, the most recent configuration takes effect.
Examples
# Set the SmartOn password to abc in plaintext form.
<Sysname> system-view
[Sysname] dot1x smarton password simple abc
Related commands
display dot1x
dot1x smarton
dot1x smarton switched

dot1x smarton retry

Use dot1x smarton retry to set the maximum number of attempts for retransmitting an
EAP-Request/Notification packet to a client.
Use undo dot1x smarton retry to restore the default.
Syntax
dot1x smarton retry retries
undo dot1x smarton retry
Default
A maximum of three attempts are made to retransmit an EAP-Request/Notification packet to a client.
Views
System view
Predefined user roles
network-admin
Parameters
retries: Specifies the maximum attempts for retransmitting an EAP-Request/Notification packet to a
client. The value range is 1 to 10.
Usage guidelines
When the device sends an EAP-Request/Notification packet to the client, the SmartOn client timeout
timer (set by using the dot1x smarton timer supp-timeout command) starts. If the device does not
receive any EAP-Response/Notification packets from the client within the timer, it retransmits the
EAP-Request/Notification packet to the client. After the device has made the maximum
retransmission attempts but received no response, it stops the 802.1X authentication process for the
client.
Examples
# Set the maximum attempts to 5 for retransmitting an EAP-Request/Notification packet.
<Sysname> system-view
[Sysname] dot1x smarton retry 5
Related commands
display dot1x
dot1x smarton timer supp-timeout
182