Reset Blacklist Statistics; Reset Client-Verify Protected Statistics - H3C MSR Series Command Reference Manual

Views
User view
Predefined user roles
network-admin
Parameters
source-ipv6-address: Specifies the IPv6 address for a blacklist entry.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the IPv6 address
belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. Do not
specify this option if the IPv6 address is on the public network.
all: Specifies all dynamic IPv6 blacklist entries.
Usage guidelines
This command deletes dynamic IPv6 blacklist entries. To delete manual IPv6 blacklist entries, use
the undo blacklist ipv6 command.
Examples
# Clear all dynamic IPv6 blacklist entries.
<Sysname> reset blacklist ipv6 all
Related commands
display blacklist ipv6

reset blacklist statistics

Use rest blacklist statistics to clear blacklist statistics.
Syntax
reset blacklist statistics
Views
User view
Predefined user roles
network-admin
Usage guidelines
This command resets the counter for dropped packets for all blacklist entries.
Examples
# Clear blacklist statistics.
<Sysname> reset blacklist statistics
Related commands
display blacklist ip
display blacklist ipv6

reset client-verify protected statistics

Use reset client-verify protected statistics to clear protected IP statistics for client verification.
Syntax
reset client-verify { dns | http | tcp } protected { ip | ipv6 } statistics
1069