Scp Ipv6 - H3C MSR Series Command Reference Manual

interface interface-type interface-number: Specifies a source interface by its type and number. The
IPv4 address of this interface is the source IPv4 address of the SCP packets.
ip ip-address: Specifies a source IPv4 address.
Examples
# Connect the SCP client to the SCP server 200.1.1.1. Specify the public key of the server as svkey,
and download the file abc.txt from the server. The SCP client uses publickey authentication. Use the
following algorithms:
•
Preferred key exchange algorithm: dh-group14-sha1.
•
Preferred server-to-client encryption algorithm: aes128-cbc.
•
Preferred client-to-server HMAC algorithm: sha1.
•
Preferred server-to-client HMAC algorithm: sha1-96.
•
Preferred compression algorithm: zlib.
<Sysname> scp 200.1.1.1 get abc.txt prefer-kex dh-group14-sha1 prefer-stoc-cipher
aes128-cbc prefer-ctos-hmac sha1 prefer-stoc-hmac sha1-96 prefer-compress zlib public-key
svkey

scp ipv6

Use scp ipv6 to establish a connection to an IPv6 SCP server and transfer files with the server.
Syntax
In non-FIPS mode:
scp ipv6 server [ port-number ] [ vpn-instance vpn-instance-name ] [ -i interface-type
interface-number ] { put | get } source-file-name [ destination-file-name ] [ identity-key { dsa | ecdsa
| rsa } | prefer-compress zlib | prefer-ctos-cipher { 3des-cbc | aes128-cbc | aes256-cbc |
des-cbc } | prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } | prefer-kex
{ dh-group-exchange-sha1 | dh-group1-sha1 | dh-group14-sha1 } | prefer-stoc-cipher
{ 3des-cbc | aes128-cbc | aes256-cbc | des-cbc } | prefer-stoc-hmac { md5 | md5-96 | sha1 |
sha1-96 } ] * [ public-key keyname | source { interface interface-type interface-number | ipv6
ipv6-address } ] *
In FIPS mode:
scp ipv6 server [ port-number ] [ vpn-instance vpn-instance-name ] [ -i interface-type
interface-number ] { put | get } source-file-name [ destination-file-name ] [ identity-key { ecdsa |
rsa } | prefer-compress zlib | prefer-ctos-cipher { aes128-cbc | aes256-cbc } | prefer-ctos-hmac
{ sha1 | sha1-96 } | prefer-kex dh-group14-sha1 | prefer-stoc-cipher { aes128-cbc | aes256-cbc }
| prefer-stoc-hmac { sha1 | sha1-96 } ] * [ public-key keyname | source { interface interface-type
interface-number | ipv6 ipv6-address } ] *
Views
User view
Predefined user roles
network-admin
Parameters
server: Specifies a server by its IPv6 address or host name, a case-insensitive string of 1 to 253
characters.
port-number: Specifies the port number of the server, in the range of 1 to 65535. The default is 22.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the server belongs.
The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters.
703