Ssh Server Compatible-Ssh1X Enable - H3C MSR Series Command Reference Manual

Syntax
ssh server authentication-timeout time-out-value
undo ssh server authentication-timeout
Default
The SSH user authentication timeout timer is 60 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
time-out-value: Specifies an authentication timeout timer in the range of 1 to 120 seconds.
Usage guidelines
If a user does not finish the authentication when the timeout timer expires, the connection cannot be
established.
To prevent malicious occupation of TCP connections, set the authentication timeout timer to a small
value.
Examples
# Set the authentication timeout timer to 10 seconds for SSH users.
<Sysname> system-view
[Sysname] ssh server authentication-timeout 10
Related commands
display ssh server

ssh server compatible-ssh1x enable

Use ssh server compatible-ssh1x enable to enable the SSH server to support SSH1 clients.
Use undo ssh server compatible-ssh1x [ enable ] to restore the default.
Syntax
ssh server compatible-ssh1x enable
undo ssh server compatible-ssh1x [ enable ]
Default
The SSH server does not support SSH1 clients.
Views
System view
Predefined user roles
network-admin
network-operator
Usage guidelines
This command is not available in FIPS mode.
This configuration does not affect logged-in users. It affects only users that attempt to log in after the
configuration.
684