Display Portal User - H3C MSR Series Command Reference Manual

Server detection
User synchronization
Status
Exclude-attribute
Logout notification
Table 32 Command output
Field
Type
Portal server
IP
VPN instance
Port
Server detection
User synchronization
Status
Exclude-attribute
Logout-notification
Related commands
portal enable
portal server
server-detect (portal authentication server view)
user-sync

display portal user

Use display portal user to display information about portal users.
Syntax
display portal user { all | ap ap-name [ radio radio-id ] | auth-type { cloud | email | local | normal
| qq | wechat } | interface interface-type interface-number | ip ipv4-address | ipv6 ipv6-address |
mac mac-address | pre-auth [ interface interface-type interface-number | ip ipv4-address | ipv6
ipv6-address ] | username username } [ brief | verbose ]
: Timeout 60s Action: log
: Timeout 200s
: Up
: Not configured
: Retry 3 interval 5s
Description
Portal authentication server type:
•
CMCC—CMCC server.
•
IMC—IMC server.
Name of the portal authentication server.
IP address of the portal authentication server.
MPLS L3VPN where the portal authentication server resides.
Listening port on the portal authentication server.
Parameters for portal authentication server detection:
•
Detection timeout in seconds.
•
Action (log) triggered by the reachability status change of the portal
authentication server.
User idle timeout in seconds for portal user synchronization.
Reachability status of the portal authentication server:
•
N/A—Portal authentication server detection is disabled. Reachability status
of the server is unknown.
•
Up—Portal authentication server detection is enabled. The server is
reachable.
•
Down—Portal authentication server detection is enabled. The server is
unreachable.
Attributes that are not carried in portal protocol packets sent to the portal
authentication server.
Maximum number of times and the interval (in seconds) for retransmitting a
logout notification packet.
280