H3C MSR Series Command Reference Manual page 894

argument represents the slot number of the card. If you do not specify a card, this command displays
IPv4 unicast session statistics for all cards. (Distributed devices in IRF mode.)
Examples
# Display statistics for unicast sessions from IP address 111.15.111.66.
<Sysname> display session statistics ipv4 source-ip 111.15.111.66
Slot 1:
Current sessions: 3
TCP sessions:
UDP sessions:
ICMP sessions:
ICMPv6 sessions:
UDP-Lite sessions:
SCTP sessions:
DCCP sessions:
RAWIP sessions:
# Display statistics for IPv4 unicast TCP sessions.
<Sysname> display session statistics ipv4 protocol tcp
Slot 1:
Current sessions: 3
TCP sessions:
UDP sessions:
ICMP sessions:
ICMPv6 sessions:
UDP-Lite sessions:
SCTP sessions:
DCCP sessions:
RAWIP sessions:
Table 133 Command output
Field
Current sessions
TCP sessions
UDP sessions
ICMP sessions
ICMPv6 sessions
UDP-Lite sessions
SCTP sessions
DCCP sessions
RAWIP sessions
0
0
3
0
0
0
0
0
3
0
0
0
0
0
0
0
Description
Total number of unicast sessions.
Number of TCP unicast sessions and number of TCP unicast sessions in
different states.
Number of UDP unicast sessions and number of UDP unicast sessions in
different states.
Number of ICMP unicast sessions and number of ICMP unicast sessions in
different states.
Number of ICMPv6 unicast sessions and number of ICMPv6 unicast
sessions in different states.
Number of UDP-Lite unicast sessions and number of UDP-Lite unicast
sessions in different states.
Number of SCTP unicast sessions and number of SCTP unicast sessions in
different states.
Number of DCCP unicast sessions and number of DCCP unicast sessions in
different states.
Number of Raw IP unicast sessions and number of Raw IP unicast sessions
in different states.
871