H3C MSR Series Command Reference Manual page 902

Syntax
Centralized devices in standalone mode:
display session table ipv4 [ source-ip start-source-ip [ end-source-ip ] ] [ destination-ip
start-destination-ip [ end-destination-ip ] ] [ protocol { dccp | icmp | raw-ip | sctp | tcp | udp |
udp-lite } ] [ source-port source-port ] [ destination-port destination-port ] [ vpn-instance
vpn-name ] [ verbose ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display session table ipv4 [ slot slot-number ] [ source-ip start-source-ip [ end-source-ip ] ]
[ destination-ip start-destination-ip [ end-destination-ip ] ] [ protocol { dccp | icmp | raw-ip | sctp |
tcp | udp | udp-lite } ] [ source-port source-port ] [ destination-port destination-port ]
[ vpn-instance vpn-name ] [ verbose ]
Distributed devices in IRF mode:
display session table ipv4 [ chassis chassis-number slot slot-number ] [ source-ip start-source-ip
[ end-source-ip ] ] [ destination-ip start-destination-ip [ end-destination-ip ] ] [ protocol { dccp |
icmp | raw-ip | sctp | tcp | udp | udp-lite } ] [ source-port source-port ] [ destination-port
destination-port ] [ vpn-instance vpn-name ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays information for all cards. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays information for all member devices. (Centralized devices in IRF
mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
information for all cards. (Distributed devices in IRF mode.)
source-ip start-source-ip [ end-source-ip ]: Specifies a source IPv4 address or IPv4 address range
for a unicast session from the initiator to the responder. The start source-ip argument specifies the
start source IPv4 address. The end source-ip argument specifies the end source IPv4 address.
destination-ip start-destination-ip [ end-destination-ip ]: Specifies a destination IPv4 address or
IPv4 address range for a unicast session from the initiator to the responder. The start destination-ip
argument specifies the start destination IPv4 address. The end destination-ip argument specifies the
end destination IPv4 address.
protocol { dccp | icmp | raw-ip | sctp | tcp | udp | udp-lite }: Specifies an IPv4 transport layer
protocol, including DCCP, ICMP, RawIP, SCTP, TCP, UDP, and UDP-Lite.
source-port source-port: Specifies a source port by its number. The source-port argument specifies
the source port of a unicast session from the initiator to the responder. The value range for the
source-port argument is 0 to 65535.
destination-port destination-port: Specifies a destination port by its number. The destination-port
argument specifies the destination port of a unicast session from the initiator to the responder. The
value range for the destination-port argument is 0 to 65535.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a
case-sensitive string of 1 to 31 characters.
879