H3C MSR Series Command Reference Manual page 1169

network-operator
Parameters
interface tunnel interface-number: Specifies an mGRE tunnel interface by its number in the range
of 0 to 4095. If you do not specify this option, the command displays NHRP mapping table
information for all mGRE tunnel interfaces.
peer ipv4-address: Specifies a peer public address. If you do not specify this option, the command
displays NHRP mapping entries for all peers.
verbose: Displays detailed information about NHRP mapping entries. If you do not specify this
keyword, the command displays brief information about NHRP mapping entries.
Usage guidelines
If you do not specify any parameters, this command displays brief information about all NHRP
mapping entries.
Examples
# Display brief information about all NHRP mapping entries.
<Sysname> display nhrp map
Destination/mask
172.16.1.1/32
172.16.1.2/32
# Display detailed information about all NHRP mapping entries.
<Sysname> display nhrp map verbose
Interface
Destination/mask
Next hop
Creation time
Expiration time
Type
Flags
NBMA address
Interface
Destination/mask
Next hop
Creation time
Expiration time
Type
Flags
NBMA address
Table 181 Command output
Field
Destination/mask
Nexthop
Creation time
Next hop
172.16.1.1
172.16.1.2
: Tunnel0
: 172.16.1.1/32
: 172.16.1.1
: 00:38:44
: 01:21:15
: cached
: unique, up, used
: 105.112.100.4
: Tunnel0
: 172.16.1.2/32
: 172.16.1.2
: 00:25:53
: 01:34:06
: cached
: unique, up, used, ipsec
: 105.112.100.92
NBMA address Type
105.112.100.4 cached
105.112.100.92 cached
Description
Destination tunnel interface address and mask of the
mapping entry.
Next hop address to reach the destination network.
Period of time for which the mapping entry has been
created.
1146
Interface
Tunnel0
Tunnel0