Reset Portal Captive-Bypass Statistics - H3C MSR Series Command Reference Manual

Comware 7 security

Hide thumbs Also See for MSR Series:

Table of Contents

# Clear all portal authentication failure records.

<Sysname> reset portal auth-fail-record all

# Clear portal authentication failure records for the portal user whose IPv4 address is 11.1.0.1.

<Sysname> reset portal auth-fail-record ipv4 11.1.0.1

# Clear portal authentication failure records for the portal user whose IPv6 address is 2000::2.

<Sysname> reset portal auth-fail-record ipv6 2000::2

# Clear portal authentication failure records for the portal user whose username is abc.

<Sysname> reset portal auth-fail-record username abc

# Clear portal authentication failure records with the failure time in the range of 2016/3/4 14:20 to

2016/3/4 16:23.

<Sysname> reset portal auth-fail-record start-time 2016/3/4 14:20 end-time 2016/3/4 16:23

Related commands

display portal auth-fail-record

reset portal captive-bypass statistics

Use reset portal captive-bypass statistics to clear portal captive-bypass packet statistics.

Centralized devices in standalone mode:

reset portal captive-bypass statistics

Distributed devices in standalone mode/Centralized devices in IRF mode:

reset portal captive-bypass statistics [ slot slot-number ]

Distributed devices in IRF mode:

reset portal captive-bypass statistics [ chassis chassis-number slot slot-number ]

Predefined user roles

network-admin

slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command

clears portal captive-bypass packet statistics for all cards. (Distributed devices in standalone mode.)

slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member

device, this command clears portal captive-bypass packet statistics for all member devices.

(Centralized devices in IRF mode.)

chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The

chassis-number argument represents the member ID of the IRF member device. The slot-number

argument represents the slot number of the card. If you do not specify a card, this command clears

portal captive-bypass packet statistics for all cards. (Distributed devices in IRF mode.)

# (Centralized devices in standalone mode.) Clear portal captive-bypass packet statistics.

<Sysname> reset portal captive-bypass statistics