Ipsec Transform-Set; Local-Address - H3C MSR Series Command Reference Manual

Related commands
display ipsec sa
sa idle-time

ipsec transform-set

Use ipsec transform-set to create an IPsec transform set and enter its view, or enter the view of an
existing IPsec transform set.
Use undo ipsec transform-set to delete an IPsec transform set.
Syntax
ipsec transform-set transform-set-name
undo ipsec transform-set transform-set-name
Default
No IPsec transform sets exist.
Views
System view
Predefined user roles
network-admin
Parameters
transform-set-name: Specifies a name for the IPsec transform set, a case-insensitive string of 1 to 63
characters.
Usage guidelines
An IPsec transform set, part of an IPsec policy, defines the security parameters for IPsec SA
negotiation, including the security protocol, encryption algorithms, authentication algorithms, and
encapsulation mode.
Examples
# Create an IPsec transform set named tran1 and enter its view.
<Sysname> system-view
[Sysname] ipsec transform-set tran1
[Sysname-transform-set-tran1]
Related commands
display ipsec transform-set

local-address

Use local-address to configure the local IP address for the IPsec tunnel.
Use undo local-address to restore the default.
Syntax
local-address { ipv4-address | ipv6 ipv6-address }
undo local-address
550