Display Attack-Defense Statistics Interface - H3C MSR Series Command Reference Manual

IPv6 address
# (Centralized devices in standalone mode.) Display the number of IPv6 scanning attack victims.
<Sysname> display attack-defense scan victim ipv6 count
Totally 3 victim IP addresses.
# (Distributed devices in standalone mode/centralized devices in IRF mode.) Display the number of
IPv6 scanning attack victims.
<Sysname> display attack-defense scan victim ipv6 count
Slot 1:
Totally 3 victim IP addresses.
Slot 2:
Totally 0 victim IP addresses.
# (Distributed devices in IRF mode.) Display the number of IPv6 scanning attack victims.
<Sysname> display attack-defense scan victim ipv6 count
Slot 1 in chassis 1:
Totally 3 victim IP addresses.
Slot 2 in chassis 2:
Totally 0 victim IP addresses.
Table 161 Command output
Field
Totally 3 victim IP addresses
IPv6 address
VPN instance
Protocol
Detected on
Duration(min)
Related commands
display attack-defense scan attacker ipv6
scan detect

display attack-defense statistics interface

Use display attack-defense statistics interface to display attack detection and prevention
statistics on an interface.
Syntax
Centralized devices in standalone mode:
display attack-defense statistics interface interface-type interface-number
Distributed devices in standalone mode/centralized devices in IRF mode:
display attack-defense statistics interface interface-type interface-number [ slot slot-number ]
Distributed devices in IRF mode:
display attack-defense statistics interface interface-type interface-number [ chassis
chassis-number slot slot-number ]
VPN instance Protocol
Description
Total number of IPv6 scanning attack victims.
IPv6 address of the victim.
MPLS L3VPN instance to which the victim IPv6 address belongs. If the
victim IPv6 address is on the public network, this field displays hyphens
(--).
Name of the protocol.
Where the attack is detected, on the device (Local) or an interface.
The amount of time the attack lasts, in minutes.
1013
Detected on Duration(min)