Portal Apply Web-Server - H3C MSR Series Command Reference Manual

Default
No MAC binding server is specified.
Views
Interface view
Service template view
Predefined user roles
network-admin
Parameters
server-name: Specifies a MAC binding server by its name, a case-sensitive string of 1 to 32
characters.
Usage guidelines
Only direct portal authentication supports MAC-based quick portal authentication.
For MAC-based quick portal authentication to take effect, perform the following tasks:
•
Configure normal portal authentication.
•
Configure a MAC binding server.
•
Specify the MAC binding server on a portal enabled interface or service template.
Examples
# Specify the MAC binding server mts on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] portal apply mac-trigger-server mts
Related commands
portal mac-trigger-server

portal apply web-server

Use portal [ ipv6 ] apply web-server to specify a portal Web server. The device redirects the HTTP
or HTTPS requests sent by unauthenticated portal users to the portal Web server.
Use undo portal [ ipv6 ] apply web-server to delete a portal Web server.
Syntax
portal [ ipv6 ] apply web-server server-name [ secondary ]
undo portal [ ipv6 ] apply web-server [ server-name ]
Default
No portal Web servers are specified.
Views
Interface view
Service template view
Predefined user roles
network-admin
320