Log User-Login Enable; Login-Message - H3C MSR Series Command Reference Manual

Parameters
filtering: Enables resource access log filtering. With this keyword specified, the device generates
only one log for accesses of the same user to the same resource in a minute. If this keyword is not
specified, the device generates a log for each resource access.
Usage guidelines
This feature logs resource accesses of SSL VPN users. The logs are sent to the information center of
the device. For the logs to be output correctly, you must also configure the information center on the
device. For more information about the information center, see Network Management and
Monitoring Configuration Guide.
Examples
# Enable resource access logging.
<Sysname> system-view
[Sysname] sslvpn context ctx1
[Sysname-sslvpn-context-ctx1] log resource-access enable

log user-login enable

Use log user-login enable to enable logging for user login and logoff events.
Use undo log user-login enable to disable logging for user login and logoff events.
Syntax
log user-login enable
undo log user-login enable
Default
Logging for user login and logoff events is disabled.
Views
SSL VPN context view
Predefined user roles
network-admin
Usage guidelines
This feature logs user login and logoff events. The logs are sent to the information center of the
device. For the logs to be output correctly, you must also configure the information center on the
device. For more information about the information center, see Network Management and
Monitoring Configuration Guide.
Examples
# Enable logging for user logins and logouts.
<Sysname> system-view
[Sysname] sslvpn context ctx1
[Sysname-sslvpn-context-ctx1] log user-login enable

login-message

Use login-message to configure a login message.
Use undo log login-message to restore the default.
777