H3C MSR Series Command Reference Manual page 951

Sessions threshold Hi/Lo: 2000/1500
Sessions count
Sessions limit rate
New session flag
# (Centralized devices in standalone mode.) Display the number of limit rule-based statistics sets by
source IP address 2::1.
<Sysname> display connection-limit ipv6-stat-nodes global source 2::1 count
Current limit statistic nodes count is 16.
# (Distributed devices in standalone mode.) Display the number of limit rule-based statistics sets on
VLAN-interface 10 on the card in slot 2.
<Sysname> display connection-limit ipv6-stat-nodes interface vlan-interface 10 slot 2
count
Slot 2:
Current limit statistic nodes count is 1.
# (Centralized devices in IRF mode.) Display the number of limit rule-based statistics sets on IRF
member device 2.
<Sysname> display connection-limit ipv6-stat-nodes global slot 2 count
Slot 2:
Current limit statistic nodes count is 0.
# (Distributed devices in IRF mode.) Display the number of limit rule-based statistics sets of IRF
member device 1 on the card in slot 2.
<Sysname> display connection-limit ipv6-stat-nodes global chassis 1 slot 2 count
Slot 2 in chassis 1:
Current limit statistic nodes count is 0.
Table 143 Command output
Field
Src IP address
Dst IP address
VPN instance
DS-Lite tunnel peer
Service
Limit rule ID
Sessions threshold
Hi/Lo
Sessions count
Sessions limit rate
: 1988
: 0
: Permit
Description
Source IP address.
Destination IP address.
MPLS L3VPN instance to which the IP address belongs. Two hyphens (--)
indicates that the IP address is on the public network.
ID of the DS-Lite tunnel. Two hyphens (--) indicates that the connection does not
belong to a DS-Lite tunnel.
Protocol name and service port number.
For an unwell-known protocol, this field displays unknown(xx).The cross signs
(xx) indicates the protocol number. For the ICMP protocol, the protocol number is
the decimal digits that are converted from the hexadecimal contents of the type
and code fields.
ID of the matched rule. The ACL number of the rule is enclosed in parentheses.
Upper and lower connection limits.
Number of current connections.
Maximum number of connections established per second.
928