Authentication-Timeout; Auth-Url - H3C MSR Series Command Reference Manual

authentication-timeout

Use authentication-timeout to specify the authentication timeout, which is the maximum amount of
time the device waits for portal authentication to complete after receiving the MAC binding query
response.
Use undo authentication-timeout to restore the default.
Syntax
authentication-timeout minutes
undo authentication-timeout
Default
The authentication timeout time is 3 minutes.
Views
MAC binding server view
Predefined user roles
network-admin
Parameters
minutes: Specifies the authentication timeout in the range of 1 to 15 minutes.
Usage guidelines
On receiving the MAC binding query response from the MAC binding server, the device starts the
timeout timer for portal authentication.
If the user passes portal authentication before the timer expires, the device immediately deletes the
MAC-trigger entry for the user. If the user does not pass portal authentication within the
authentication timeout, the device deletes the MAC-trigger entry after the entry expires.
Examples
# Specify the authentication timeout as 10 minutes.
<Sysname> system-view
[Sysname] portal mac-trigger-server mts
[Sysname-portal-mac-trigger-server-mts] authentication-timeout 10
Related commands
display portal mac-trigger-server

auth-url

Use auth-url to specify the URL of the QQ authentication server.
Use undo auth-url to delete the URL of the QQ authentication server.
Syntax
auth-url url-string
undo auth-url
Default
The URL of QQ authentication server is https://graph.qq.com.
Views
QQ authentication server view
234