H3C MSR Series Command Reference Manual page 903

verbose: Displays detailed information about IPv4 unicast session entries. If you do not specify this
keyword, the command displays brief information about IPv4 unicast session entries.
Usage guidelines
If you do not specify any parameters, this command displays all IPv4 unicast session entries.
Examples
# (Centralized devices in standalone mode.) Display brief information about all IPv4 unicast session
entries.
<Sysname> display session table ipv4
Slot 0:
Initiator:
Source
Destination IP/port: 192.168.1.55/22
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: TCP(6)
Inbound interface: GigabitEthernet1/0/1
Source security zone: Trust
Initiator:
Source
Destination IP/port: 192.168.1.55/2048
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: ICMP(1)
Inbound interface: GigabitEthernet1/0/1
Source security zone: Trust
Total sessions found: 2
# (Distributed devices in standalone mode/centralized devices in IRF mode.) Display brief
information about all IPv4 unicast session entries.
<Sysname> display session table ipv4
Slot 1:
Initiator:
Source
Destination IP/port: 192.168.1.55/22
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: TCP(6)
Inbound interface: GigabitEthernet1/0/1
Source security zone: Trust
Initiator:
Source
Destination IP/port: 192.168.1.55/2048
DS-Lite tunnel peer: -
VPN instance/VLAN ID/Inline ID: -/-/-
Protocol: ICMP(1)
Inbound interface: GigabitEthernet1/0/1
IP/port: 192.168.1.18/1877
IP/port: 192.168.1.18/1792
IP/port: 192.168.1.18/1877
IP/port: 192.168.1.18/1792
880