Network Exclude - H3C MSR Series Command Reference Manual

# Configure an IPv6 address object with the IPv6 address of 1:1:1::1 and prefix length of 24.
<Sysname> system-view
[Sysname] object-group ipv6 address ipv6group
[Sysname-obj-grp-ipv6-ipv6group] network subnet 1:1:1::1 24
# Configure an IPv6 address object with the address range of 1:1:1::1 to 1:1:1::100
<Sysname> system-view
[Sysname] object-group ipv6 address ipv6group
[Sysname-obj-grp-ipv6-ipv6group] network range 1:1:1::1 1:1:1::100
# Configure an IPv6 address object using object group ipv6group2.
<Sysname> system-view
[Sysname] object-group ipv6 address ipv6group
[Sysname-obj-grp-ipv6-ipv6group] network group-object ipv6group2

network exclude

Use network exclude to exclude an IPv4 or IPv6 address from an address object.
Use undo network exclude to restore the default.
Syntax
object-id network exclude ipv4-address/ipv6-address
undo object-id network exclude ipv4-address/ipv6-address
Default
No IPv4 or IPv6 address in an address object is excluded.
Views
IPv4 address object group view
IPv6 address object group view
Predefined user roles
network-admin
Parameters
object-id: Specifies an address object by its ID in the range of 1 to 4294967294. The specified
address object must have been created.
ipv4-address/ipv6-address: Specifies the IPv4 or IPv6 address to be excluded.
Usage guidelines
The following matrix shows the command and hardware compatibility:
Hardware
MSR810/810-W/810-W-DB/810-LM/810-W-LM/810-
10-PoE/810-LM-HK/810-W-LM-HK
MSR2600-10-X1
MSR 2630
MSR3600-28/3600-51
MSR3600-28-SI/3600-51-SI
MSR3610-X1/3610-X1-DP/3610-X1-DC/3610-X1-D
P-DC
Command compatibility
Yes
Yes
Yes
Yes
No
Yes
946