H3C MSR Series Command Reference Manual page 268

Field
Portal VSRP status
Authentication type
Portal Web server
Secondary portal Web server
Portal mac-trigger-server
Authentication domain
Extend-auth domain
Pre-auth domain
Description
Status of the portal VSRP on the interface:
•
M_Initial—The master device is in initial state.
•
M_Delay—The master device is in delayed state. (The device will
switch to the master state after the delay time.)
•
M_Alone—The master device is in standalone state. This state
occurs when the master device and the backup device cannot
communicate with each other. A typical reason is that the failover link
is disconnected.
•
M_Hello—The master device is building a TCP connection with the
backup device (negotiating the VSRP state and portal enabling state
on the interface).
•
M_Collect—The master device is waiting for portal user information
from the backup device.
•
M_Sync—The master device is sending portal user information to
the backup device.
•
M_Synced—The master device has synchronized the portal user
information to the backup device.
•
B_Initial—The backup device is in initial state.
•
B_Alone—The backup device is in standalone state. This state
occurs when the backup device and the master device cannot
communicate with each other. A typical reason is that the failover link
is disconnected.
•
B_Hello—The backup device is building a TCP connection with the
master device (negotiating the VSRP state and portal enabling state
on the interface).
•
B_Report—The backup device is sending portal user information to
the master device.
•
B_Sync—The backup device is receiving portal user information
from the master device.
•
B_Synced—The backup device has synchronized the portal
information with the master device.
•
Down—The device is not running in the VSRP instance.
This field does not appear when the interface is not enabled with portal or
not associated with a VSRP instance.
Type of authentication enabled on the interface:
•
Direct—Direct authentication.
•
Redhcp—Re-DHCP authentication.
•
Layer3—Cross-subnet authentication.
Name of the primary portal Web server specified on the interface.
This field displays the (active) flag next to the server name if the server is
being used.
Name of the backup portal Web server specified on the interface.
This field displays the (active) flag next to the server name if the server is
being used.
Name of the MAC binding server specified on the interface.
Mandatory authentication domain on the interface.
Authentication domain configured for third-party authentication on an
interface or service template.
Preauthentication domain for portal users on the interface.
245